STC APN Settings Saudi Arabia — Internet Setup Guide

Need to configure STC internet settings on your phone in Saudi Arabia? Here's the complete APN setup guide for Android and iPhone. APN: jawalnet. com.

STC Cost: Free Prepaid Postpaid Verified May 2026

Skip typing the APN manually altogether: send “JawalNet” to 2222 and STC pushes the full configuration to your phone automatically — a shortcut that resolves most “data not working” cases faster than navigating settings menus by hand.

Quick answer

APN: jawalnet.com.sa — leave username and password blank. Or send “JawalNet” to 2222 for automatic setup.

The SMS method, and its one quirk

After sending “JawalNet” to 2222, you’ll typically be asked for an installation PIN — enter 1234, the default STC settings PIN, when prompted. This single detail is what trips people up, since the SMS process otherwise works smoothly.

Manual setup, if you prefer

Android: Settings → Mobile Networks → APN → add “STC-Internet” with APN “jawalnet.com.sa” → save, select, restart.

iPhone: Settings → Cellular → Cellular Data Network → APN “jawalnet.com.sa” → restart.

Need to check your data package too? See checking your STC data balance.

Verified against STC’s official support guidance, August 2026.

Written & verified by GSMplans Editorial Team · Last checked May 2026

The GSMplans Editorial Team researches, writes, and verifies every guide on this site against official operator sources — Etisalat, du, STC, Mobily, Zain, Ooredoo, Vodafone, Omantel, Batelco, and… Our process →

Step-by-Step Guide

  1. 1

    Try automatic

    Insert SIM, restart, wait. Most phones auto-configure STC settings.

  2. 2

    SMS method

    Send "JawalNet" to 2222. Install received settings using PIN 1234.

  3. 3

    Manual setup

    Settings > APN > Add: Name=STC-Internet, APN=jawalnet.com.sa. Save, select, restart.

Alternative Methods

SMS "JawalNet" to 2222

Automatic via SIM

stc.com.sa > Support

Troubleshooting

Data not working after setup

Ensure Mobile Data is ON and you have an active data package (*405# for STC data check).

Settings SMS not received

Try sending "JawalNet" to 2222 again. If still nothing, enter settings manually.

Pro Tip
If the SMS auto-config method asks for a PIN, enter 1234. This is the default installation PIN for STC settings messages.

Frequently Asked Questions

Do I need manual APN setup?

Most phones auto-configure. If not, send "JawalNet" to 2222, or enter jawalnet.com.sa manually.

What is the STC APN name?

jawalnet.com.sa — applies to both Sawa prepaid and postpaid accounts.

What PIN do I enter for the SMS settings method?

1234, the default installation PIN for STC settings messages.

What if the settings SMS never arrives?

Try sending "JawalNet" to 2222 again, or enter the APN manually as a fallback.

iPhone won't let me edit the APN?

Restart and check Settings → General → About for a pending carrier update.

STC
Saudi Arabia
Customer Care: 900
All STC guides Saudi Arabia telecom overview